SUMAKE

Product Details:

Automatic impact stop system.
hi/mid/ low torque for exentded use application .
low cell warning 20% flash red light 10% red light .
extra plastic cover dissipate heat for increased comfort .

Product Details:

1 ) HIGH ACCURACY ASSURANCE : 3% deviation of Torque ( Shut off Type ), Assure the best Quality .
2) Economy : wide - ranging Torgue with longer life of motor (2 years motor  guaranteeb for Shut off Type).
3) Dormancy mode ( power mode) : once the Screwdriver idles for over 3 Second , it will turn to Dormancy mode to save the Energy and increase the standby time.

Additional Information:

• Production Capacity: ONCE THE SCREWDRIVER IDLES FOR OVER 3 SEC
• Delivery Time: 4 TO 6 WEEKS
• Packaging Details: DEPENDING ON AREA

Product Details:

1) HIGH ACCURACY ASSURANCE :3% Deviation of torque ( Shut off type) , assure the best Quality .
2) ECONOMY : Wide -ranging torque with longer life cycle of motor ( 2 year motor Guarantee for Shut off Type ).
3) LESS COUNTERFORCE : Special mechanical structure and motor to inmprove operator safety and reduce occupation diseases.
4) Dormancy mode ( power Saving) : Once the Screwdriver idels for over 3 sec it will trun  to Dormancy mode to save the Energy and Increase the Standby time.

Additional Information:

• Production Capacity: 8000 SCREWS ON LOADING 6nm troque
• Delivery Time: 4 TO 6 WEEKS
• Packaging Details: Depends on area

Product Details:

♦Provide with the rocker arm, enable to revolve on 360 degrees.

♦Main shaft can be extended to maximum 830mm. Power arm inside includes nitrogen gas stick, allow user to grab the arm easily, automatic lift up and back to position after finishing the work.

♦Easy to assemble and disassemble.

Additional Information:

• Delivery Time: 4 to 6 weeks

Product Details:

Smallest & lightest ( for ea-b101l-c/c3-ea-b103ls1-c/c3).
high functioning brushless motor .
lightest & lowest torque  0. 008-0. 34nm & 1. 96-4. 90nm 
external dimension .
lever start type & push to start.
1) innovative brushless motor design elimiattes carbon dust and reduces noise and vibration resulting in lower  maintenance .
2) hihgly mobile , easy to operate , high efficiency brushless motor reduce fatigue over long working hours speed control can be adjust via power supply.
optional esd safe housins are available.

Additional Information:

• Production Capacity: 0.08-1.5 NM TO 1.96-4.90 NM
• Delivery Time: 4 TO 6 WEEKS
• Packaging Details: DEPENDING ON AREA

Product Details:

Ideal tool for precise torque and assembling  process managment in production line.
1) automatic impact stop system : external torque adjustment with led light identify five mode of torque  option .
2) innovation brushless motor : design eliminates carbon dust pollution; result in low maintenance.  
3) light weight for easy carring and operating.
4) special mechanical structure & motor wth less counterforce to improve operator in low maintence.

Product Details:

 Brushless motor design does not create the carbon dust. It is the best fit for assembling high torque products in clean-room circumstance.

 High torque and strong power performance benefits of Sumake high powerful electric screwdriver along capabilities of a pneumatic tool.

 Torque range from 2 to 15 N.m; precise torque control provides excellent torque repeatability.

 Highly mobile; easy to operate; high efficiency, motor can be free from fatigue under long-working hours.

 Torque Accuracy +- 5%

Product Details:

♦ Innovative Brushless motor design eliminates carbon dust and produces less vibration and noise which results in overall lower maintenance costs.

♦ Torque ranges from 0.02 ~ 4.9 Nm. 
♦ Compact LED counter display and control unit: easy to setup and operate, provides the same functionality as our traditional power supply counter units
♦ User sets up the counter according to his/her specific requirements then leaves system in automatic mode to inspect and report on the precision of fastening the screws.
♦ Suitable for production lines, this counter effectively counts, controls, and reports back on the fastening operation;an additional subunit can be provided that allows external control/reporting via a PLC interface.
♦ Automatic learning can be used to assist the user in setting up the time ranges used to identify good and bad fastening times.  
♦ Two-color housing, ergonomic design, easy to grip.

♦ Torque Accuracy ±3% 

Product Details:

* Employ extra strong magnet.

* Fatigue-resistant for long time using.

* Easy operate with high working efficient.

* Best fit for general machine screws operation.

* Actuation against single pressing.

* Torque Accuracy +-3%

Product Details:

Features-

* Wide torque range – single model versatility.

* Economical solution for general assembly.

* External torque adjustment – easy to set up and secure with optional torque fixing ring.

* High endurance and good performance model.

* Externally replaceable brushes for ease of maintenance.

* Fit for assembling common simple kits and products.

* Torque Accuracy +-5%

Product Details:

The TM-015A digital torque meter is designed for workstation torque testing/measuring and is ideal for calibrating electric and air torque screwdrivers.

Key Features

• Measuring Range: 0.13 – 13.2 in lbs
• Measuring Accuracy: Within ±0.5%
• Measuring Direction: CW & CCW
• NiMH rechargeable batteries
• Bidirectional accuracy of ±0.5% of indicated reading.
• Single-step access to all functions ensures ease of use and training.
• Visual limit indicator.
• 4 available measurement units: in.lbs, CNm, kgF.cm.
• Clockwise and Counter-clockwise operation for “On” and “Off” torque testing.
• Ideal for testing slip electric and air torque screwdrivers.
• Comes with run-down nuts made to use with Electric and Air Torque Screwdrivers.
• NiMH rechargeable batteries provide 8 hours continuous use.
• Visual limit alarms.
• Data Storage up to 800 readings
• 4 available measurement units: in.lbs, CNm, kgF.cm. 
• Rechargeable battery
• USB 1.0 connector for data output to a computer
• Comes with run-down nuts made to use with Electric and Air Torque Screwdrivers
• Ideal for testing slip or auto shut-off clutch electric and air torque screwdrivers.

Product Details:

Advanced Torque Readout System EAA-CTDS Uses our premium brushless torque clutched screwdrivers technology with the additional capability of a smart torque readout system with screw counting functionality. The torque readout system provides instant torque value that can be captured via a computer with our Data Acquisition Software System. The additional screw counting functionality assures that user has inserted the correct number of screws without stripping or cross-threading any. The clutched screwdriver assures that the set torque is reached within a +- 3% accuracy and the EAA-CTDS provides a visual system to aid the user as well as an integrated computer transmission system (data transmission RS232) that can be used to capture torque settings. Addition to the torque readout the EAA-CTDS system can also provide the following Input/Output capabilities: Outputs: 

Inputs:
1) Screw OK Signal
2) Screw NOK Signal
3) Screw batch OK Signal 
4) Screw Braked Signal 

Outputs:
1) External Start Screwdriver signal 
2) External Start in reverse signal 

Use with Brushless Screwdrivers: The EAA-CTDS system must be purchased with an EAA-BNK4 or EAA-BNK6 series screwdriver along with a compatible power supply for the screwdriver series.

Product Details:

Model No.Torque Tester DI-4B-25

For Daily Torque measurement of a small impact Tool, Air screw Drivers and High Torque Electric drivers

DI-4B-25 - Up to MAX. 25 N.m (250 kgf.cm) - With Blow Counter for Impact Tools. - High Luminous LED Display for high visibility in dark place

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: box type

Product Details:

Works with EA-BN203 ~ EA-BN419 brushless series screwdriver. 
 Ideal for non-magnetic screws for example plastic, aluminum, and stainless steel screws.
 Match Screw size to vacuum pick-up adaptor.  
 Works on screw head diameters between 3.2 ~ 7.5 mm.

Product Details:

Brushless AC Full Auto Shut-off Electric Screwdriver

Features:

* Brushless motor

* Torque Range 0.49 ~ 4.9 N.m

* Torque Range 0.49 ~ 4.9 N.m

* Compact & Economy.

Application:

 

* It's very suitable for Auto shop.

Product Details:

The telescopic Torque Arm system absorbs the torque produced by assembly tools reducing operator fatigue and increase overall productivity.  This torque arm is suitable for all torque jobs.  

Key Features of Telescopic Torque Arms:

• Maximum reach 36 inches
• Minimum reach 16 inches
• Bearings ensure smooth movement 
• For use with Air and Electric tools
• Max Torque Capacity 265 in-lbs

Product Details:

1) Angle Head can be adjusted through 360o by 45o truns in 8 equal position.
2) Brushless Motor ( Environmental Friendly ).
3) One hand operation Easy to Switch Forward / Reverse. PCB control Protection.
4) The performance with fully charged battery can reach to 560screws on loading 60nm ( EAW-B1860-40).
5) Accessories with Waist hook , Wrist strap, internal Troque Adjustment driver . 
6) low power protection .
7)Reverse control protection .
8) Battery self-identified & sleep Mode

Additional Information:

• Production Capacity: 560 screws on loading 60nm torque
• Delivery Time: 4 to 6 weeks
• Packaging Details: Depending on Area

Product Details:

The EAA-MCTDS5 Torque Readout System connects with up to 5 of our Torque Screwdrivers allowing for multiple torque settings at a workstation.  

Key Features

• EAA-MCTDS5
• Torque Range 2.6- 510.0  in-lb
• Combine 5  Brushless Screwdriver .

• The EAA-MCTDS5 package contains everything needed to record torque values for critical assembly applications. It comes with up to 5 Electric Torque Screwdriver and our Advance Torque Readout System (EAA-MCTDS5). The torque readout system provides instant torque value that can be captured via a computer using our Data Acquisition System (software comes with system). The additional screw counting functionality assures that the user has inserted the correct number of screws without stripping or cross-threading. All this information is displayed on the control unit (to help guide the user through the assembly process) and the Data Acquisition System (to allow for torque and system settings to be captured). The clutched screwdrivers assure that the set torque is reached within a +- 3% accuracy and the EAA-MCTDS5 provides a visual system to aid to the user as well as an integrated computer transmission system.

  In addition to the torque readout the EAA-MCTDS5 system can also provide Input/Output capabilities for additional torque and screwdriver control. Use any of our Brushless Torque Screwdrivers (series EA-BNK, EA-BTNK and EA-BANK) with the EAA-MCTDS5 Torque Readout System. All of our brushless motors generate less heat, require less maintenance, and are ideal for clean-rooms. Common usages for this screwdriver are demanding assembly fastening applications that require one or all the following: Torque control, ESD protection, RPM control, screw counting and slow start functionality, 2 or more different torque settings or RPM settings.

Additional Information:

• Delivery Time: 4 TO 6 WEEKS
• Packaging Details: DEPENDING ON AREA

Product Details:

Advanced Torque Readout System EAA-CTDS Uses our premium brushless torque clutched screwdrivers technology with the additional capability of a smart torque readout system with screw counting functionality. The torque readout system provides instant torque value that can be captured via a computer with our Data Acquisition Software System. The additional screw counting functionality assures that user has inserted the correct number of screws without stripping or cross-threading any. The clutched screwdriver assures that the set torque is reached within a +- 3% accuracy and the EAA-CTDS provides a visual system to aid the user as well as an integrated computer transmission system (data transmission RS232) that can be used to capture torque settings. Addition to the torque readout the EAA-CTDS system can also provide the following Input/Output capabilities: Outputs: 

Inputs:
1) Screw OK Signal
2) Screw NOK Signal
3) Screw batch OK Signal 
4) Screw Braked Signal 

Outputs:
1) External Start Screwdriver signal 
2) External Start in reverse signal 

Use with Brushless Screwdrivers: The EAA-CTDS system must be purchased with an EAA-BNK4 or EAA-BNK6 series screwdriver along with a compatible power supply for the screwdriver series.

Additional Information:

• Delivery Time: 4 TO 6 WEEKS

Product Details:

 SUMAKE SMT-C1 smart controller enables operators to track tightening status, set up different tightening parameter (torque/thread) and transfer data. Users may switch between multiple programs to achieve various tightening tasks.

  Operator can easily set-up and operate either from the panel or PC, and settings can be locked up using password and key to prevent unauthorized adjustment.

 With integrated SD card module, data logging, processing or transferring can be easily done without an internet connection or external module.